Конвективное охлаждение лопаточных аппаратов в турбине, работающей на сверхкритическом диоксиде углерода
Ключевые слова:
охлаждение лопаток, сверхкритический диоксид углерода, кислородно-топливный цикл, СО2-турбина, коэффициент теплоотдачи, цикл Аллама
Аннотация
В настоящее время ведется активная борьба с выбросами парниковых газов, а именно, — диоксида углерода, на энергетических объектах. Одним из решений по сокращению выбросов СО2 на объектах энергетики является создание кислородно-топливных энергетических комплексов (КТЭК), имеющих практически нулевые выбросы парниковых газов. Наиболее перспективным и эффективным КТЭК является цикл Аллама. Исследованы возможность и эффективность использования сверхкритического диоксида углерода в качестве хладагента для углекислотной турбины данного цикла. Для этого использованы одномерные методы расчета и методики численного моделирования. Выполнена верификация газодинамического расчета по экспериментальным данным. Получены коэффициенты теплоотдачи сверхкритического СО2 при различных условиях течения в элементах проточных частей турбин. Сформулирована одномерная методика предварительного расчета расхода хладагента для лопатки, работающей в углекислотной турбине. Представленный подход позволяет учитывать теплофизические свойства сверхкритического диоксида углерода.
Литература
1. Leonard M.D., Michaelides E.E., Michaelides D.N. Energy Storage Needs for the Substitution of Fossil Fuel Power Plants with Renewables // Renewable Energy. 2020. V. 145. Pp. 951—962.
2. Perera F., Nadeau K. Climate Change, Fossil-fuel Pollution, and Children’s Health // New England J. Medicine. 2022. V. 386(24). Pp. 2303—2314.
3. Bariss U., Laicane I., Blumberga D. Analysis of Factors Influencing Energy Efficiency in a Smart Metering Pilot. Energetika. 2014. V. 60(2). Pp. 125—135.
4. Energy I. World Energy Outlook 2014. Paris: IEA Publ., 2014.
5. Pavithran A., Sharma M., Shukla A.K. Oxy-fuel Combustion Power Cycles: a Sustainable Way to Reduce Carbon Dioxide Emission // Distributed Generation & Alternative Energy J. 2021. V. 36(4). Pp. 335—362.
6. Brun K., Friedman P., Dennis R. Fundamentals and Applications of Supercritical Carbon Dioxide (sCO2) Based Power Cycles. Woodhead Publ., 2017.
7. Rogalev A. e. a. Research and Development of the Oxy-fuel Combustion Power Cycles with CO2 Recirculation // Energies. 2021. V. 14(10). P. 2927.
8. Allam R.J. e. a. The Oxy-fuel, Supercritical CO2 Allam Cycle: New Cycle Developments To Produce Even Lower-Cost Electricity from Fossil Fuels Without Atmospheric Emissions // Proc. Turbo Expo: Power for Land, Sea, and Air. N.-Y.: American Soc. Mechanical Engineers, 2014. V. 45660. P. V03BT36A016.
9. Akshat R. Первая в мире электростанция на ископаемом топливе с нулевым уровнем выбросов // Газотурбинные технологии. 2018. №. 2. С. 14—17.
10. Alsarhan L.M. e. a. Circular Carbon Economy (CCE): a Way to Invest CO2 and Protect the Environment, a Review // Sustainability. 2021. V. 13(21). P. 11625.
11. Martin S. e. a. Progress Update on the Allam Cycle: Commercialization of Net Power and the Net Power Demonstration Facility // Proc. XIV Greenhouse Gas Control Technol. Conf. Melbourne, 2018. Pp. 21—26.
12. Allam R. e. a. Demonstration of the Allam Cycle: an Update on the Development Status of a High Efficiency Supercritical Carbon Dioxide Power Process Employing Full Carbon Capture // Energy Proc. 2017. V. 114. Pp. 5948—5966.
13. Han J. C., Dutta S., Ekkad S. Gas Turbine Heat Transfer and Cooling Technology. Boca Raton: CRC Press, 2012.
14. Fomin Y.D. e. a. Thermodynamic Properties of Supercritical Carbon Dioxide: Widom and Frenkel Lines // Phys. Rev. E. 2015. V. 91(2). P. 022111.
15. Sciubba E. Air-cooled Gas Turbine Cycles. Part 1: an Analytical Method for the Preliminary Assessment Of Blade Cooling Flow Rates // Energy. 2015. V. 83. Pp. 104—114.
16. Albeirutty M.H., Alghamdi A.S., Najjar Y.S. Heat Transfer Analysis for a Multistage Gas Turbine Using Different Blade-cooling Schemes // Appl. Thermal Eng. 2004. V. 24(4). Pp. 563—577.
17. Torbidoni L., Horlock J. H. A New Method to Calculate the Coolant Requirements of a High-temperature Gas Turbine Blade // J. Turbomach. 2005. V. 127(1). Pp. 191—199.
18. Wahl A. e. a. Heat Transfer Correlation for sCO2 Cooling in a 2 mm Tube // J. Supercritical Fluids. 2021. V. 173. P. 105221.
19. Sullivan N. On the Local Heat Transfer Behavior or Supercritical Carbon Dioxide [Электрон. ресурс] https://commons.erau.edu/edt/618/ (дата обращения 08.08.2023).
20. Dang C., Hihara E. In-tube Cooling Heat Transfer of Supercritical Carbon Dioxide Part 1. Experimental Measurement // Intern. J. Refrigeration. 2004. V. 27(7). Pp. 736—747.
21. Králik J. CFD Simulation of Air Flow Over an Object with Gable Roof, Revised with Y+ Approach // Trans. VSB. Civil Eng. Series. 2016. V. 16(2). Pp. 85—94
22. Ying Q. e. a. Vortex Patterns Investigation and Enstrophy Analysis in a Small Scale S-CO2 Axial Turbine // Energies. 2021. V. 14(19). P. 6112.
23. Huber M.L. e. a. The NIST REFPROP Database for Highly Accurate Properties of Industrially Important Fluids // Industrial & Eng. Chem. Research. 2022. V. 61(42). Pp. 15449—15472.
24. Terrell E.J., Mouzon B.D., Bogard D.G. Convective Heat Transfer Through Film Cooling Holes of a Gas Turbine Blade Leading Edge // Proc. Turbo Expo: Power for Land, Sea and Air. 2005. V. 47268. Pp. 833—844.
25. Дейч М.Е., Филиппов Г.А., Лазарев Л.Я. Атлас профилей решеток осевых турбомашин. М.: Машиностроение, 1965.
26. Li B. e. a. Design of Thermal Barrier Coatings Thickness for Gas Turbine Blade Based on Finite Element Analysis // Mathematical Problems in Eng. 2017. V. 2017. Pp. 1—14.
---
Для цитирования: Смирнов А.О., Бердюгин К.А., Осипов В.Р., Тищенко В.А. Конвективное охлаждение лопаточных аппаратов в турбине, работающей на сверхкритическом диоксиде углерода // Вестник МЭИ. 2024. № 3. С. 78—88. DOI: 10.24160/1993-6982-2024-3-78-88
---
Конфликт интересов: авторы заявляют об отсутствии конфликта интересов
#
1. Leonard M.D., Michaelides E.E., Michaelides D.N. Energy Storage Needs for the Substitution of Fossil Fuel Power Plants with Renewables. Renewable Energy. 2020;145:951—962.
2. Perera F., Nadeau K. Climate Change, Fossil-fuel Pollution, and Children’s Health. New England J. Medicine. 2022;386(24):2303—2314.
3. Bariss U., Laicane I., Blumberga D. Analysis of Factors Influencing Energy Efficiency in a Smart Metering Pilot. Energetika. 2014;60(2):125—135.
4. Energy I. World Energy Outlook 2014. Paris: IEA Publ., 2014.
5. Pavithran A., Sharma M., Shukla A. K. Oxy-fuel Combustion Power Cycles: a Sustainable Way to Reduce Carbon Dioxide Emission. Distributed Generation & Alternative Energy J. 2021;36(4):335—362.
6. Brun K., Friedman P., Dennis R. Fundamentals and Applications of Supercritical Carbon Dioxide (sCO2) Based Power Cycles. Woodhead Publ., 2017.
7. Rogalev A. e. a. Research and Development of the Oxy-fuel Combustion Power Cycles with CO2 Recirculation. Energies. 2021;14(10):2927.
8. Allam R.J. e. a. The Oxy-fuel, Supercritical CO2 Allam Cycle: New Cycle Developments To Produce Even Lower-Cost Electricity from Fossil Fuels Without Atmospheric Emissions. Proc. Turbo Expo: Power for Land, Sea, and Air. N.-Y.: American Soc. Mechanical Engineers, 2014;45660:V03BT36A016.
9. Akshat R. Pervaya v Mire Elektrostantsiya na Iskopaemom Toplive s Nulevym Urovnem Vybrosov. Gazoturbinnye Tekhnologii. 2018;2:14—17. (in Russian).
10. Alsarhan L.M. e. a. Circular Carbon Economy (CCE): a Way to Invest CO2 and Protect the Environment, a Review. Sustainability. 2021;13(21):11625.
11. Martin S. e. a. Progress Update on the Allam Cycle: Commercialization of Net Power and the Net Power Demonstration Facility. Proc. XIV Greenhouse Gas Control Technol. Conf. Melbourne, 2018:21—26.
12. Allam R. e. a. Demonstration of the Allam Cycle: an Update on the Development Status of a High Efficiency Supercritical Carbon Dioxide Power Process Employing Full Carbon Capture. Energy Proc. 2017;114:5948—5966.
13. Han J. C., Dutta S., Ekkad S. Gas Turbine Heat Transfer and Cooling Technology. Boca Raton: CRC Press, 2012.
14. Fomin Y.D. e. a. Thermodynamic Properties of Supercritical Carbon Dioxide: Widom and Frenkel Lines. Phys. Rev. E. 2015;91(2):022111.
15. Sciubba E. Air-cooled Gas Turbine Cycles. Part 1: an Analytical Method for the Preliminary Assessment Of Blade Cooling Flow Rates. Energy. 2015;83:104—114.
16. Albeirutty M.H., Alghamdi A.S., Najjar Y.S. Heat Transfer Analysis for a Multistage Gas Turbine Using Different Blade-cooling Schemes. Appl. Thermal Eng. 2004;24(4):563—577.
17. Torbidoni L., Horlock J. H. A New Method to Calculate the Coolant Requirements of a High-temperature Gas Turbine Blade. J. Turbomach. 2005;127(1):191—199.
18. Wahl A. e. a. Heat Transfer Correlation for sCO2 Cooling in a 2 mm Tube. J. Supercritical Fluids. 2021;173:105221.
19. Sullivan N. On the Local Heat Transfer Behavior or Supercritical Carbon Dioxide [Elektron. Resurs] https://commons.erau.edu/edt/618/ (Data Obrashcheniya 08.08.2023).
20. Dang C., Hihara E. In-tube Cooling Heat Transfer of Supercritical Carbon Dioxide Part 1. Experimental Measurement. Intern. J. Refrigeration. 2004;27(7):736—747.
21. Králik J. CFD Simulation of Air Flow Over an Object with Gable Roof, Revised with Y+ Approach. Trans. VSB. Civil Eng. Series. 2016;16(2):85—94
22. Ying Q. e. a. Vortex Patterns Investigation and Enstrophy Analysis in a Small Scale S-CO2 Axial Turbine. Energies. 2021;14(19):6112.
23. Huber M.L. e. a. The NIST REFPROP Database for Highly Accurate Properties of Industrially Important Fluids. Industrial & Eng. Chem. Research. 2022;61(42):15449—15472.
24. Terrell E.J., Mouzon B.D., Bogard D.G. Convective Heat Transfer Through Film Cooling Holes of a Gas Turbine Blade Leading Edge. Proc. Turbo Expo: Power for Land, Sea and Air. 2005;47268:833—844.
25. Deych M.E., Filippov G.A., Lazarev L.Ya. Atlas Profiley Reshetok Osevykh Turbomashin. M.: Mashinostroenie, 1965. (in Russian).
26. Li B. e. a. Design of Thermal Barrier Coatings Thickness for Gas Turbine Blade Based on Finite Element Analysis. Mathematical Problems in Eng. 2017;2017:1—14
---
For citation: Smirnov A.O., Berdyugin K.A., Osipov V.R., Tishchenko V.A. Convective Cooling of Blades in a Turbine Driven by Supercritical Carbon Dioxide. Bulletin of MPEI. 2024;3:78—88. (in Russian). DOI: 10.24160/1993-6982-2024-3-78-88
---
Conflict of interests: the authors declare no conflict of interest
2. Perera F., Nadeau K. Climate Change, Fossil-fuel Pollution, and Children’s Health // New England J. Medicine. 2022. V. 386(24). Pp. 2303—2314.
3. Bariss U., Laicane I., Blumberga D. Analysis of Factors Influencing Energy Efficiency in a Smart Metering Pilot. Energetika. 2014. V. 60(2). Pp. 125—135.
4. Energy I. World Energy Outlook 2014. Paris: IEA Publ., 2014.
5. Pavithran A., Sharma M., Shukla A.K. Oxy-fuel Combustion Power Cycles: a Sustainable Way to Reduce Carbon Dioxide Emission // Distributed Generation & Alternative Energy J. 2021. V. 36(4). Pp. 335—362.
6. Brun K., Friedman P., Dennis R. Fundamentals and Applications of Supercritical Carbon Dioxide (sCO2) Based Power Cycles. Woodhead Publ., 2017.
7. Rogalev A. e. a. Research and Development of the Oxy-fuel Combustion Power Cycles with CO2 Recirculation // Energies. 2021. V. 14(10). P. 2927.
8. Allam R.J. e. a. The Oxy-fuel, Supercritical CO2 Allam Cycle: New Cycle Developments To Produce Even Lower-Cost Electricity from Fossil Fuels Without Atmospheric Emissions // Proc. Turbo Expo: Power for Land, Sea, and Air. N.-Y.: American Soc. Mechanical Engineers, 2014. V. 45660. P. V03BT36A016.
9. Akshat R. Первая в мире электростанция на ископаемом топливе с нулевым уровнем выбросов // Газотурбинные технологии. 2018. №. 2. С. 14—17.
10. Alsarhan L.M. e. a. Circular Carbon Economy (CCE): a Way to Invest CO2 and Protect the Environment, a Review // Sustainability. 2021. V. 13(21). P. 11625.
11. Martin S. e. a. Progress Update on the Allam Cycle: Commercialization of Net Power and the Net Power Demonstration Facility // Proc. XIV Greenhouse Gas Control Technol. Conf. Melbourne, 2018. Pp. 21—26.
12. Allam R. e. a. Demonstration of the Allam Cycle: an Update on the Development Status of a High Efficiency Supercritical Carbon Dioxide Power Process Employing Full Carbon Capture // Energy Proc. 2017. V. 114. Pp. 5948—5966.
13. Han J. C., Dutta S., Ekkad S. Gas Turbine Heat Transfer and Cooling Technology. Boca Raton: CRC Press, 2012.
14. Fomin Y.D. e. a. Thermodynamic Properties of Supercritical Carbon Dioxide: Widom and Frenkel Lines // Phys. Rev. E. 2015. V. 91(2). P. 022111.
15. Sciubba E. Air-cooled Gas Turbine Cycles. Part 1: an Analytical Method for the Preliminary Assessment Of Blade Cooling Flow Rates // Energy. 2015. V. 83. Pp. 104—114.
16. Albeirutty M.H., Alghamdi A.S., Najjar Y.S. Heat Transfer Analysis for a Multistage Gas Turbine Using Different Blade-cooling Schemes // Appl. Thermal Eng. 2004. V. 24(4). Pp. 563—577.
17. Torbidoni L., Horlock J. H. A New Method to Calculate the Coolant Requirements of a High-temperature Gas Turbine Blade // J. Turbomach. 2005. V. 127(1). Pp. 191—199.
18. Wahl A. e. a. Heat Transfer Correlation for sCO2 Cooling in a 2 mm Tube // J. Supercritical Fluids. 2021. V. 173. P. 105221.
19. Sullivan N. On the Local Heat Transfer Behavior or Supercritical Carbon Dioxide [Электрон. ресурс] https://commons.erau.edu/edt/618/ (дата обращения 08.08.2023).
20. Dang C., Hihara E. In-tube Cooling Heat Transfer of Supercritical Carbon Dioxide Part 1. Experimental Measurement // Intern. J. Refrigeration. 2004. V. 27(7). Pp. 736—747.
21. Králik J. CFD Simulation of Air Flow Over an Object with Gable Roof, Revised with Y+ Approach // Trans. VSB. Civil Eng. Series. 2016. V. 16(2). Pp. 85—94
22. Ying Q. e. a. Vortex Patterns Investigation and Enstrophy Analysis in a Small Scale S-CO2 Axial Turbine // Energies. 2021. V. 14(19). P. 6112.
23. Huber M.L. e. a. The NIST REFPROP Database for Highly Accurate Properties of Industrially Important Fluids // Industrial & Eng. Chem. Research. 2022. V. 61(42). Pp. 15449—15472.
24. Terrell E.J., Mouzon B.D., Bogard D.G. Convective Heat Transfer Through Film Cooling Holes of a Gas Turbine Blade Leading Edge // Proc. Turbo Expo: Power for Land, Sea and Air. 2005. V. 47268. Pp. 833—844.
25. Дейч М.Е., Филиппов Г.А., Лазарев Л.Я. Атлас профилей решеток осевых турбомашин. М.: Машиностроение, 1965.
26. Li B. e. a. Design of Thermal Barrier Coatings Thickness for Gas Turbine Blade Based on Finite Element Analysis // Mathematical Problems in Eng. 2017. V. 2017. Pp. 1—14.
---
Для цитирования: Смирнов А.О., Бердюгин К.А., Осипов В.Р., Тищенко В.А. Конвективное охлаждение лопаточных аппаратов в турбине, работающей на сверхкритическом диоксиде углерода // Вестник МЭИ. 2024. № 3. С. 78—88. DOI: 10.24160/1993-6982-2024-3-78-88
---
Конфликт интересов: авторы заявляют об отсутствии конфликта интересов
#
1. Leonard M.D., Michaelides E.E., Michaelides D.N. Energy Storage Needs for the Substitution of Fossil Fuel Power Plants with Renewables. Renewable Energy. 2020;145:951—962.
2. Perera F., Nadeau K. Climate Change, Fossil-fuel Pollution, and Children’s Health. New England J. Medicine. 2022;386(24):2303—2314.
3. Bariss U., Laicane I., Blumberga D. Analysis of Factors Influencing Energy Efficiency in a Smart Metering Pilot. Energetika. 2014;60(2):125—135.
4. Energy I. World Energy Outlook 2014. Paris: IEA Publ., 2014.
5. Pavithran A., Sharma M., Shukla A. K. Oxy-fuel Combustion Power Cycles: a Sustainable Way to Reduce Carbon Dioxide Emission. Distributed Generation & Alternative Energy J. 2021;36(4):335—362.
6. Brun K., Friedman P., Dennis R. Fundamentals and Applications of Supercritical Carbon Dioxide (sCO2) Based Power Cycles. Woodhead Publ., 2017.
7. Rogalev A. e. a. Research and Development of the Oxy-fuel Combustion Power Cycles with CO2 Recirculation. Energies. 2021;14(10):2927.
8. Allam R.J. e. a. The Oxy-fuel, Supercritical CO2 Allam Cycle: New Cycle Developments To Produce Even Lower-Cost Electricity from Fossil Fuels Without Atmospheric Emissions. Proc. Turbo Expo: Power for Land, Sea, and Air. N.-Y.: American Soc. Mechanical Engineers, 2014;45660:V03BT36A016.
9. Akshat R. Pervaya v Mire Elektrostantsiya na Iskopaemom Toplive s Nulevym Urovnem Vybrosov. Gazoturbinnye Tekhnologii. 2018;2:14—17. (in Russian).
10. Alsarhan L.M. e. a. Circular Carbon Economy (CCE): a Way to Invest CO2 and Protect the Environment, a Review. Sustainability. 2021;13(21):11625.
11. Martin S. e. a. Progress Update on the Allam Cycle: Commercialization of Net Power and the Net Power Demonstration Facility. Proc. XIV Greenhouse Gas Control Technol. Conf. Melbourne, 2018:21—26.
12. Allam R. e. a. Demonstration of the Allam Cycle: an Update on the Development Status of a High Efficiency Supercritical Carbon Dioxide Power Process Employing Full Carbon Capture. Energy Proc. 2017;114:5948—5966.
13. Han J. C., Dutta S., Ekkad S. Gas Turbine Heat Transfer and Cooling Technology. Boca Raton: CRC Press, 2012.
14. Fomin Y.D. e. a. Thermodynamic Properties of Supercritical Carbon Dioxide: Widom and Frenkel Lines. Phys. Rev. E. 2015;91(2):022111.
15. Sciubba E. Air-cooled Gas Turbine Cycles. Part 1: an Analytical Method for the Preliminary Assessment Of Blade Cooling Flow Rates. Energy. 2015;83:104—114.
16. Albeirutty M.H., Alghamdi A.S., Najjar Y.S. Heat Transfer Analysis for a Multistage Gas Turbine Using Different Blade-cooling Schemes. Appl. Thermal Eng. 2004;24(4):563—577.
17. Torbidoni L., Horlock J. H. A New Method to Calculate the Coolant Requirements of a High-temperature Gas Turbine Blade. J. Turbomach. 2005;127(1):191—199.
18. Wahl A. e. a. Heat Transfer Correlation for sCO2 Cooling in a 2 mm Tube. J. Supercritical Fluids. 2021;173:105221.
19. Sullivan N. On the Local Heat Transfer Behavior or Supercritical Carbon Dioxide [Elektron. Resurs] https://commons.erau.edu/edt/618/ (Data Obrashcheniya 08.08.2023).
20. Dang C., Hihara E. In-tube Cooling Heat Transfer of Supercritical Carbon Dioxide Part 1. Experimental Measurement. Intern. J. Refrigeration. 2004;27(7):736—747.
21. Králik J. CFD Simulation of Air Flow Over an Object with Gable Roof, Revised with Y+ Approach. Trans. VSB. Civil Eng. Series. 2016;16(2):85—94
22. Ying Q. e. a. Vortex Patterns Investigation and Enstrophy Analysis in a Small Scale S-CO2 Axial Turbine. Energies. 2021;14(19):6112.
23. Huber M.L. e. a. The NIST REFPROP Database for Highly Accurate Properties of Industrially Important Fluids. Industrial & Eng. Chem. Research. 2022;61(42):15449—15472.
24. Terrell E.J., Mouzon B.D., Bogard D.G. Convective Heat Transfer Through Film Cooling Holes of a Gas Turbine Blade Leading Edge. Proc. Turbo Expo: Power for Land, Sea and Air. 2005;47268:833—844.
25. Deych M.E., Filippov G.A., Lazarev L.Ya. Atlas Profiley Reshetok Osevykh Turbomashin. M.: Mashinostroenie, 1965. (in Russian).
26. Li B. e. a. Design of Thermal Barrier Coatings Thickness for Gas Turbine Blade Based on Finite Element Analysis. Mathematical Problems in Eng. 2017;2017:1—14
---
For citation: Smirnov A.O., Berdyugin K.A., Osipov V.R., Tishchenko V.A. Convective Cooling of Blades in a Turbine Driven by Supercritical Carbon Dioxide. Bulletin of MPEI. 2024;3:78—88. (in Russian). DOI: 10.24160/1993-6982-2024-3-78-88
---
Conflict of interests: the authors declare no conflict of interest
Опубликован
2024-02-20
Выпуск
Раздел
Турбомашины и поршневые двигатели (технические науки) (2.4.7)
